It's LC49HG90DMMXUE from Samsung
Many thanks for your feedback.
The Poseidon will be officially released in Jan 2020 in selected markets, and Aqua will be released soon after in Q1 2020.
Design is undergoing and its intended to be compact and for budget users.
I'm expecting to finish from the drawings and prototype by Q1 2020, and release by end of Q1 or early Q2 2020.
Not yet available in the US, I'm looking for ODM factories for production in US and EU.
Many thanks for your feedback. About the desk it's not redharbenger, it's a cross desk that I designed and I brand it commercially as poseidon.
The reason I call it poseidon because I'm intending to make 2 sizes, large with freon cooling like this one is Poseidon and Aqua is for small version standard size.
I have insta page for the product insta: poseidon_crossdesk
Many thanks bro, appreciate the feedback and point
Many thanks for your feedback, stay tune i'm going to add videos and back panel including the chiller and performance test shortly.
Its good however you can improve little on it:
1- Match CPU and RAM clock speed- CPU selected is 3.7ghz while your RAM at 3200 which will be a bottle neck on performance
2- Have on M.2 Pro 3.7Ghz Memory of 512ghz will match the same clock speed
3- PSU - push to 750w or 800 - the 650 i guess is too low and will over heat
Yes detailed results published http://www.3dmark.com/fs/20853543
yeah thats not an issue... Done 5.4ghz CPU in the past so many times.
GPU easy 2025ghz
i've added the result pictures in the pictures and also the link from 3D Mark.
Actually i'm sure i can overclock the CPU to 5.3ghz and GPU to 2067mhz and Internal GPU to 1600mhz, however it will require some time. Benchmark with overclock will increase about 10% which i assume to be about 25500
Yes its 24946, i will try to overclock it tonight to see what will be the best benchmark i can get. http://www.3dmark.com/fs/20853543
Benchmark Result: 24 946
I'm not sure about the $1200 but i can assure you 3Dmark score of 25,000+
Many thanks for your feedback...
I really hope that this built can be featured and i will appreciate your support, it took me almost a year of developing every single component from the desk, panels, gas cooling, HDD case, airflow, and lighting / fan control.
There are a lot of new findings that involves performance beside the look that i would like to talk about. for example the HDD casing, it was designed to eliminate HDD rotary vibrations similar to the ones used in high end servers.
Also the air flow system and more, and the way it was designed to reduce fan noise from 50db to 30db and improve airflow...
Many thanks for your feedback and thanks for following up on both installations. Please stay tune i'm going to add videos and back panel including the chiller and performance test shortly.
Many many thanks for your feedback. The build is currently is under major improvement, pls stay tune in next few days will post pictures show major changes
Many thanks for your feedback.
Motherboard is doing great after latest BIOS update, i had alot of issues when it first released due to compatibility with M.2 and GPU, however ASUS released few BIOS updates which fixed all the issues.
The design of the desk take into consideration high airflow which helped keeping the MOBO temp at 29C and PCH between 40-55C.
Water temp without chiller is about: 20C and with Chiller can go to 5C on start and goes up about 12-15C
Many thanks for your feedback. For the monitor stand I fabricate it myself as you can see in picture 26.
The monitor comes with bracket just attach wall bracket to the fabricated stand.
Thanks. The thing about the 34” is the safe view distance which is vertical space between the viewer and monitor.
I have 49” monitor and on smaller desk I had a lot of issues in my eyes and crazy headache caused dryness to eyes, tried blue light filter settings & glasses, but it couldn’t stop all the radiations.
Make sure to have a desk compatible with your monitor size, 34” is big and it’s recommended to have 90cm space away from monitor.
Sorry I just noticed that I replied to the other comment 😝... I have modified my design and soon will have another pictures allowing for air ventilation to the chiller. I might also consider bigger chiller for heavy duty use
Glad you like it 😎
Thanks for your feedback. It's cross desk concept which I designed and this is the proto type of it... 😎
Not at full frames :)
Thanks, bro, I agree the cables and chiller are all over the place, the build is still under construction, still need to fabricate the chiller housing and cable management once I'm done fully with the testing on the chiller. Currently, I'm not fully satisfied with the ventilation size for the chiller and I'm considering adding more space to it.
I might reconsider adding more space at the back for better airflow....
Gald you like it :) and many thanks again for your feedback.
It's Customised desk where I have included carbon fiber finish. Now I just changed it to leather, I will post pictures and links from where to buy shortly
For the photoshop, I guess you are referring to the Poseidon / The Punisher and Logo?
It's logo concept design, which I'm moving forward with. Un-edited pictures also available showing current details, please review all pictures.
Thanks for your feedback
Thanks for your feedback, the custom cooling is small module currently located under my desk indoor not outside.
Purpose is to maintain liquid temp stable at 15c regardless to room temp, insuring stable performance at extreme settings, and great performance even when room temperature is 30+c...
I’m developing this module and shortly will develop the enclosure and control within the case, this Is only for testing.
I didn’t include pictures at the moment but shortly will do once concept and tests done.
Hope I answered your clarifications
Thanks for your feedback...
Sorry didn't understand perhaps there is typo ?
Pls send me your email and aspect ratio / resolution and will email it to you
Sure will do shortly
Thanks Majek, much appreciated
Check the new one all green. Hope it's better.
I have ordered fan grills which will hide the fans and provide a different image, however it's taking forever to arrive.
Cool looking forward to see that.
I'm actually thinking about deliding, however, i'm doing an experiment and want to see the result first.
keep me posted.
I love it, its fantastic work.
Did you try RED LED color? it should contrast well with Zombies theme and white case.
overall, its killer customization.
Thanks bro, I appreciate your support
Thanks for your positive feedback and support.
It was a mistake posting it without proper pictures, especially that I’m photographer and this is my studio workstation
Thanks for your advice. I have removed the HDD and replace it in the back since there is plenty of space for 3 HDD or more.
I have replaced it with Black mate CD player.
Check the newly added pictures and hope you like it.
Thanks for the advice i will consider it, or i will move the hdd to the backside and hide it
Check my first OC attempt results, i will try to do further on weekend.
Yes, please check results.
this is my first trial so stay tune for more.
pls check new pic and benchmark results.
i will try to run more test to top it up, but at this point this is very stable speed almost touching 5.2ghz and good for all day operation and not only benchmarking.