radiator not in p/p config, led extension on the mobo jcorsair port. 2 channels of commander pro hold 9xll for lighting control of fans. 6 intake fans directly connects commander pro's pwm ports for control. exhaust fans controled by h150i built in controller.
x34p but still not avaible in my country
i can use only m.2 nvme drive if you read it from user manuel its correct.
Mystic light can't control h150i.
there are nine LL 120's in the case are you sure look up correct pictures. three bottom intake, three side intake and the last three on h150i doing exhaust job.
i sold it :) it replaced soon with x34p or aw3418dw
to be honest not so much.
ye,s you can use top rad p/p config.
in my playing scenarios there is no gain but if your fav games has sli support its nearly doubles fps and easly beat ti but problem is many recent aaa games won't support it. atx mobo likes mine first card runs hotter. trios nearly 2.7" slot and flows only hot air from first card
it will fit perfect no issues
still solid running
i cant use any sata ports but nvme ssds removes few sata ports for limitations also noticed on user manual, i you need more power for higher clocks second eps will help you.
Your welcome :)
awesome question, second card added after build complete
only you need mystic light software from msi. do you try newer version of the software
if you reach near 5ghz speed, i think not but sli support awful or not many AAA games
you're right dude
use two hubs, and they connect through commander pro's led channels. same with node controller.
there are few ext. hdd i have but they didn't listed :) 1tb is enough for me as internal storage.
strimer cables pushes window outside because they attached above normal sleveed cables. the sleeved cables doesnt matter.
temperature not makes a big deal max difference 5 celcius on cpu, gpus in mvlink one is cold one is so hot. in these winters days side fans exhaust for aesthetics my decision. later goes intake again
sometime i hear a bit little coil whine but i can't still make decision where is the sound came from, mobo vrm, gpu or cpu but another part psu?
we are behind you;)
With vertical mount gpu never pass 67 with auto fan speed +120 gpu +700mem. My cpu not best in needs 1,35v to get stable,reason much heat in game lower fan speed 55-60, while stability tests with avx goes 85+
For these days flawless but i can beleive something goes wrong in future with it
for one app to control everything exactly.
in my country high tier corsair psus not avaible everytime they have stock problem like higher mhz vengeance pros
aliexpress search it :)
understand now, but my situation different total price is lower 200$ then single ti thats the reason for adding another one ;)
K95 rgb plat mx speed in use ? any advice for change?
if its realesed by corsair or msi it will on the desk
Hope you can see rgb cpu soon :))
you're right only has white leds
Only 5 ghz all cores cpu and 2.1ghz, 7.8ghz mem on gpu
some other reasons
Yes, plug and play style. it's not make a problem with fitting
Haha, thank you for your support mate :))
it's coolermaster. i wrap it with white foil.
Not yet, these days i dont have much time to spend with it
because there is no Swarovski rgb keyboard and mouse on market
bottom intake, top and side exhaust i test thermals now, but side intake seems more effiency and less aesthetic
adding +3 more to radiator what do you think about it :)
lianli streamer rgb cables on the way :)
Thank you, i didn’t have any issues with fitting it.
i really need it to, every case has some faults this is the 570x fault.
only two, they came from my recent ryzen build :))
i replace case fans with hd series, aio's fans mounted on rad for p/p configuration.
no, hd120 fans connect and controlled through commander pro. original fans connected direct h150i's own controller ;)
i bought it amazon.com