|$49.00||Out of stock||$49.00+||Buy|
|$58.57||Out of stock||$58.57+||Buy|
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
- NF-A14 industrialPPC-3000 PWM
- NF-A14 iPPC-3000 PWM
Brown / Black
800 - 3000 RPM
- 90 points
- 19 months ago
from completed build Tölva 2.0
Powerful fan! over 60% is getting laud, but the performance in range 40-60% is superb
- 56 points
- 15 months ago
from completed build So, I did a thing...
I have 2 of these bad boys strapped to the brick that is the D15S. They are quiet enough that I can't hear them when gaming, cool enough that my PC wont start a fire in the hell that is Australian climate, and have a long enough warranty that my children will inherit these one day.
- 39 points
- 32 months ago
from completed build Downsizing my linux workstation | FT03-Mini + Xeon V3
With a 4-Pin PWM, at idle it makes little sound while keeping everything cool. At full speed, this could be a jet engine.
It's the only fan in my Mini-ITX case and it also cools the H60 radiator. Temps on my GPU and CPU are better than the 212 EVO in mid tower. Those results speak for themselves.
- 29 points
- 38 months ago
from completed build Work PC
Idle noise definitely went up a few dB. But worth it, considering my GPUs dropped 20C from getting colder air and exhausting the hot air.
- 23 points
- 42 months ago
from completed build Overclock until it Megahertz
Expensive but amazing! I run it at 20-25% PWM at idle and never ever allow it to go above 50% it goes into server level sound range. If the compressor of your vacuum cleaner gives up, don't worry just put an NF-A14 in it you will not see the difference!
- 16 points
- 51 months ago
from completed build Windstärke V1
I like to think of this as civilized Delta fan that won't fry a fan header. It moves a ton of air with a ton of force behind it. Its loud but that is expected for a 3KRPM fan. The only real downside to this is that it requires a good amount of voltage to get started so a normal voltage reducer isn't likely to work for it.
- 16 points
- 34 months ago
from completed build Sleeping Panda (2017 rebuild of 2014 PC)
really loud, and without the right software to control them, good luck.
I love the black, I replace the brown rubber with black rubber
I use AI suite 3 from ASUS to mange the fans so they are nice and quiet. I can also set the fans to maximum, which I mostly only do for overclock testing / benchmarking purposes....
or if I want to move the air in my 25 x 17 foot room around... . .
- 16 points
- 4 months ago
from completed build Q1 2020 Workstation ATX Build (3950x + 2080S @3440x1440 100Hz)
Thrice as much air movement as another standard fan, and at least ten times as loud, so don't forget the fan curve!
- 14 points
- 45 months ago
from completed build VR dominator/1440p Monster
MY GOD when i first installed these i had 5 of these and 2 120mm's hooked up to a silverstone fan hub, and they all went full tilt 100%, i swear to you i could barely hear myself think. I went to the backyard and i promise you i could easily still hear my pc with the back door shut and all windows closed, albeit i was sitting in a chair right outside the back door and my pc is in my dining room about 5 ft from the back door. after fixing this full tilt problem these fans still push a tremendous amount of air and are pretty quiet also, i would definitely recommend getting a few of these if you are looking at them #brwnFanMR