ATX Mid Tower
Black / Blue
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
310 mm / 12.205"
- 430 mm x 194 mm x 436 mm
- 16.929" x 7.638" x 17.165"
External 5.25" Bays
Internal 3.5" Bays
- 36.371 L
- 1.284 ft³
- 23 points
- 55 months ago
from completed build First Gaming Build (Blue and Black, not White and Gold)
This case was cheap, and even though it isn't the quietest and the front panel headers take up the top drive slot, it's still a very good quality and nice buy.
- 20 points
- 38 months ago
from completed build "Craig" - my Monster $800 First build
Great budget case with good looks and plenty of airflow! Only real drawbacks are getting the side panel back on after running cables behind the MOBO plate, the top 5.25" slot cant be utilized due to the USB header, the standoff screws are black which confused me when I went to mount my mobo. Also instructions were very simple and vague
THe upside is the Drive mount sytem. Don't let PCPP fool you, it has 3 dedicated 2.5" slots and 4 3.5" slots that are for the most part tool free.
- 15 points
- 19 months ago
from completed build The Dark Hotdog
Not great cable management with bad airflow opportunity with the holes in the case. Should've revised before purchase. EDIT: The only case fan broke completely after ~9 months of use.
- 12 points
- 36 months ago
from completed build First time building a pc
Nice case with lots of room to work with. My biggest complaint is that the front 120mm fan cord was too short to reach either of the connection points on my mobo so I had to use the big 4-pin connectors and link the fans together. would have been nice if there was a place to mount another case fan on the bottom by the power supply. the front grill is very hard to pull off (felt like I was going to break it). the blue led's stand out but aren't way too bright or over the top. even though there's only the 1 front intake fan I seem to get really good airflow in my case. the window has 2 places where fans can be mounted - I kind of wish it was just one solid piece of plastic without the grills as I don't plan on mounting anything on these...more than likely I'll find two transparent filters to mount on these.
- 10 points
- 27 months ago
from completed build Work PC Twins
Good case, everything went together as expected. Wish there was a little more room for the CPU power cable to come out behind the motherboard. I used some magnet sheet paper to cover up half of the side vent. Side vents are positioned to blow over the CPU and the 1st video card.
- 10 points
- 20 months ago
from completed build High Speed Low Drag
One small plastic clip that held the front panel on was broken when I received it with no damage to the box so I believe it was shipped this way. Not a massive problem so I didn't bother with a return and replace. For the price this case worked fairly well. Decent cable management and lots of drive bays. It seems to have plenty of airflow as well.
- 8 points
- 50 months ago
from completed build Light Might (first build)
Decent looking case, not too difficult for creating my first build inside.
Only problems are hard drive installation was awkward and there isn't the best cable management around back.
- 8 points
- 21 months ago
from completed build First Gaming PC - Father/Son Build
Tried two of these and both had issues with the USB 3 port. After the second try, switched to a different case.
- 6 points
- 35 months ago
from completed build miz_turbo
Cheap, looks hot does the job and shes pretty cool. Tons of fan slots and drive slots, but you can never get enough with the deep....cool.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters