Description

Overclocking the CPU:

  • Overclocked CPU to 4.0GHz @ 1.2875 VCore
  • Cinebench completes successfully 5 times in a row
  • Ran Prime95 using small FFT option for half an hour stable
  • Completed realbench 4 hours test, the recorded temps are as followed: MIN = 28.5c AVG = 48.5c MAX = 68.0c
  • When playing Overwatch for 15 minutes the CPU usage hovered between 15-25% and temps around 50c
  • When playing Diablo 3 for over 30 minutes, CPU usage was 15% avg. and CPU temps were 47.5c

GPU:

  • GPU is stock - I will overclock eventually and I'll edit this with results at a later time.
  • For reference, at idle the GPU would be between 35c-40c
  • When playing Overwatch for 15 minutes the GPU Core usage was always over 90% while the temps were avg. 72.5c
  • When playing Diablo 3 for over 30 minutes, GPU Core usage was ~55% avg. and temps were ~65c avg

Story:

My last build was back in 2014. I actually still have the parts list saved with how much I spent on each part with the following link: https://pcpartpicker.com/list/TYzkJ8

I bought the 2016 Macbook Pro 15" with touchbar when it was first announced. I tried using an eGPU GTX 1080 with it. The performance wasn't great and setup was a terrible experience. And to boot, it costed half of what I paid for this machine.

So I decided to return the unit and build a new PC. A lot has changed in the past 4-5 years and I see that RGB is the hip thing. So I made it my goal to build a nice looking, small PC.

Originally I planned for an Intel CPU as I felt that they are just better overall than what AMD had to offer in both the gaming and non-gaming categories. I actually bought an i7-8700k along with the Asus Strix z370-i motherboard.

Then eBay had a 20% off one-day sale. At the time it seems that AMD recently released their "Zen+" processors. After reading up on it, and doing quick calculations, I was able to purchase the AMD Ryzen 5 2600 and the ASRock AB350 itx board for less than what I paid for the i7-8700k alone! I figured this has to be the best value-per-performance. And so that's why I choose AMD for this build.

Part Reviews

CPU

Pros:

  • 6 cores / 12 threads
  • Comes with heatsink + fan
  • Excellent non-gaming performance vs. i7-8700k
  • MUCH lower cost than the i7-8700k

Cons:

  • Overall, much lower clock frequency vs the i7-8700k (and noticeably behind in gaming performance vs coffee lake)
  • Not much savings from the Ryzen 5 2600x and the 2600x has a much better heatsink/fan.

I'm giving this processor 4 out of 5 stars mainly due to the 2600x being the better value here.

CPU Cooler

I choose this cooler for the combination of aesthetics, cooling performance and noise levels. This cooler has it all. The cost is very high however and with that said the performance-to-value ratio of this cooler is not good compared to competitors.

Mounting the actual heatsink onto the motherboard wasn't an issue at all. It was installing the fan clips that were the biggest pain of the installation. If you're not careful, its very easy to chip off the powder coated fins. Also easy to bend the fins as well. Overall one probably won't be able to see the bent / chipped fins but it's worth noting this.

Pros:

  • Very quiet! This one is a big plus for me
  • Aesthetically pleasing - compared to Noctua D15
  • Cooling performance seems excellent - gets my Ryzen 5 2600 stable at 4.0GHz @ 1.2875 VCore

Cons:

  • Cost. I saved a bit of money from the eBay 20% discount but even than, it feels like the performance-to-value ratio is not as great as competitive coolers out there

Comments: - Installation wasn't very difficult but it definitely isn't very easy either

Motherboard

I choose this board for it's value mainly. Compare to competitors, it offered everything I needed minus the RGB strip. It's worth noting that for Pinnacle Ridge CPUs, you need updated BIOS in order for the motherboard to detect the Ryzen 5 2600(x). Luckily for me the board had updated BIOS and it was able to detect my 2600 just fine.

Pros:

  • Excellent price for all the features and performance it offers!
  • XMP worked out of the box for my memory sticks
  • 3 fan headers: "CPU_FAN", "CHA_FAN1" and "CHA_FAN2"

Cons:

  • For overclocking, there is no Load Line Calibration option (LLC)
  • Cold boot can take a while - up to 10 seconds
  • Even though there are 3 fan headers, only 2 has DC mode support

Neutral:

  • No RGB strip compared to Asus and Gigabyte counterparts. However, this point is moot if you care less for having RGB.
  • Aesthetically pleasing if the color scheme matches your taste

Memory

I gave this 3 out of 5 stars mainly due to the cost. Unfortunately I decided to build a new PC during the GPU and Memory cost crisis.

If I could I would return this for non-RGB sticks to save a little bit of cash since the Dark Rock Pro 4 covers it. Unfortunately I bought the memory initially planning to use an AIO cooler and I felt returning it to Newegg would have been a hassle and I'd lose money doing so.

Pros:

  • 3200MHz CL14
  • XMP worked out of the box with my setup

Cons:

  • Price
  • Large profile so double check if it will fit large air coolers. Luckily for me it works with the Dark Rock Pro 4

Storage

Originally I was planning on picking up the 970 EVO but I had already purchased the 860 EVO 500GB a few months ago for the PS4 Pro. I don't use my PS4 Pro much now a days and I had the stock 1TB HDD that came with it collecting dust so I decided to use the EVO for my build to save money.

Another big reason why I decided on not purchasing the 970 EVO is the performace in games. For games, you won't notice the difference from this vs. the new m.2 970 EVO NVMe hard drives. You can read reviews and search for youtube videos comparing the two and, at best, you may load a second or so faster with the 970 EVO.

Pros:

  • Great value to performance ratio
  • For games, performance vs the 970 EVO is negligible.

Cons:

  • Requires SATA cables (power and data) vs m.2 requiring no cables
  • Outside of games, performance is nothing close to the 970 EVO

Video Card

For a while I've been debating on which GPU to pickup for this build. Considering the prices for GPUs are insane due to all the crypto mining craze AND expectations for the "1100 series" GTX to be released soon, it makes it hard for me to decide on what GPU to choose NOW.

In the end I decided to go with this particular model for a few reasons:

1) it may be much longer than everyone thinks before the GTX 1100 series are available for purchase. 2) AMD RX and Vega cards cost much more than they are worth IMO. 3) I'll sale this card after picking up the new GTX 1100 card if its worth the trouble of upgrading.

Pros:

  • Super quiet! Fans do not kick in until 60c and even when it does, it is still quiet
  • Aesthetically pleasing

Cons:

  • BIG! The card is over 12" long. Any AIO setup for my case is not possible with this card
  • Software from Asus does not feel great. I only use it to setup the RGB light configurations and leave it off after setting it.
  • Expensive. If it weren't for the eBay 20% sale, I would not have considered it as it's far too expensive vs competitors.

Case

My must-haves when looking for a case for my build was to be as small as possible while aesthetically pleasing. After looking at completed builds here, I noticed the H200i series and fell in love. I knew I had to have it, disregarding the cost of it.

I have to say building a PC with an ITX case can be difficult. As you can see from the pictures, space is very limited which makes causes some frustration. But in the end it was all so worth it.

The CAM software isn't so terrible but I REALLY dislike that they recommend you register with them. There is a guest mode which is what I used but it still sends data over to them. I wouldn't mind if they have it as an option to disable this but there isn't any option to do so. So I decided to run my case fans off the motherboard. Luckily once you configure your RGB LED strip you no longer need to have the software running again unless you decide to change the RGB LED configurations. However if you choose to use the smart device to control your system fans, you will need to have the software running at all times.

Pros:

  • Aesthetically pleasing! I love the tempered glass and color scheme of this case.
  • Excellent airflow considering the size of this case.
  • RGB LED Strip installed in excellent position
  • Cable management made easy (rather easier) considering the size of this case
  • Build quality is excellent - does not feel cheap at all
  • Smart Device acting as a fan hub. This is much needed in a itx case as you may run out of fan headers from the motherboard.

Cons:

  • CAM Software
  • Cost

Operating System

The only windows versions I've truly liked was XP and 7. IMO you must have windows as the primary OS, especially for games. So I figured I'd get the latest windows which happens to be 10.

Luckily for me I have family who works for Microsoft so they were able to get me a copy at employee rates. I'm not in love with windows 10 but it's definitely better than 8.1 IMO.

Case Fan

I bought this mainly for it's noise-to-performance ratio. Also it some-what looks aesthetically pleasing. These replaced the NZXT AER-F fans that came with the case. Main reason is the noise of the stock fans are just too loud at full load.

Pros:

  • Quiet!
  • Cheap! Each costed about $10 shipped
  • Nice polished black look

Cons:

  • It definitely doesn't feel high quality compared to the SIlentWings 3 fans
  • Wires are not sleeved
  • Doesn't come with anything but silver screws

Case Fan

Similar to the 120mm fans. These didn't replace any fans as the H200i doesn't come with fans in the front.

Monitor

My must haves for a gaming monitor is that it must be 27" and have G-Sync since I decided on going down the Nvidia GPU path.

Unfortunately, this path doesn't offer many good options. What I mean is that G-Sync monitors are pretty expensive. Also, there doesn't seem to be many options when it comes to 27" G-Sync monitors.

Originally I saw a killer deal on /r/buildapcsales for an open-boxed S2716DGR for around $265... I was a bit late to the party and it sold out pretty quick. So I got the next best listing at the time and I bought this monitor as an open-box... So I know I took a chance but in the end I got lucky. It felt brand new and even had the plastic wrappings around the monitor. Warranty is still active for almost 3 years (activated Feb. 2018) and no dead pixels! I pretty much lucked out on this monitor.

Reviews on this monitor is so-so. But for me, it was a HUGE upgrade from my previous non-gaming monitor. After calibration, I'm very happy with the colors this monitor provides. For the cost, I feel it can't be beat.

Comments

  • 15 months ago
  • 4 points

just wanna know is there a clearance between the gpu and the psu shroud?

  • 15 months ago
  • 2 points

Not much, you can see in picture 7 that the gpu is almost resting on the cable bar above the psu shroud. I just put a 1080Ti in this case and the gpu is physically resting on the cable bar, but there is no vibration/noise because of this. You could put some foam tape on that cable bar to cushion the gpu if concerned about it.

Really sleek case, but this combination of parts does present some challenges to get it all to fit. It fits, just requires installation in a certain order to make it work.

  • 15 months ago
  • 1 point

i see but doesn't the last gpu cooler choke in in-taking airflow? because of the cable bar?

  • 15 months ago
  • 1 point

Very likely yes. I haven’t had my system together long enough to tell if temps are affected though. There is an intake fan adjacent to that part of the gpu so it may help with airflow to that area

  • 13 months ago
  • 1 point

Approximately 2mm

  • 16 months ago
  • 3 points

That's the tightest fit I've ever seen a be quiet! cooler be in for a ITX case.

  • 16 months ago
  • 2 points

Bad *** looking little beast with nice temps! Nice cable management too! +1

  • 16 months ago
  • 2 points

Thanks for the photos showing tight clearance, good job on picking and fitting.

This build is a like a thermal detonator -- small and powerful -- commands attention!

  • 16 months ago
  • 2 points

Where did you buy the video card?

  • 16 months ago
  • 2 points

I bought it on eBay during a 20% off sale. I believe the seller was buydig

  • 16 months ago
  • 2 points

How are temps on the GPU? +1

  • 16 months ago
  • 3 points

I updated the description with idle temps as well as temps I recorded playing the games I play.

  • 16 months ago
  • 2 points

Looks great

  • 16 months ago
  • 2 points

Wowie that looks good

  • 16 months ago
  • 2 points

Great build. I am very impressed. But i would suggest swapping that b350 motherboard for a x470 chipset. You could get a higher clock speed and lower voltage. your 2600 should be able to atleast overclock to 4.2 ghz with the right motherboard.

  • 15 months ago
  • 2 points

I'm building almost the exact setup with my son. Can you elaborate on how (or if) you installed the motherboard in the case with the Dark Rock Pro 4 cooler?

We installed the cooler on the motherboard, but then cannot secure the top left case screw on the motherboard. We have since removed the cooler and installed the motherboard in the case and have a couple of options we plan to try to get the cooler back on. As you know, the issue with installing the cooler with the motherboard already in the case is how to secure those cooler screws with the center fan in the way. Hoping you can provide some insight...

  • 13 months ago
  • 1 point

Sorry for the late reply. I know exactly what you mean. I omitted the top left case screw from my build. The motherboard is stable and I've been using it without issues for many months now. It's been a while but originally I planned to use a phillips screwdriver bit and hand tighten it but ultimately just went ahead and omitted the screw. Let me know how you got the screw in if you did!

  • 15 months ago
  • 2 points

nice build. we have same build. but my gpu is touching the shroud but yours did'nt. did you put anything on it? thanks

  • 13 months ago
  • 1 point

Sorry for the late reply. If you look very closely at the side view of the case, underneath the "Republic of Gamers" logo of the video card, you'll see I have a very thin, padded adhesive between the GPU fan cover and the white cable bar. This helps keep the video card from slanting as well.

  • 13 months ago
  • 2 points

cool, and small.

  • 16 months ago
  • 1 point

I can tell that the huge Be quiet! cooler is tightly squeezed into the small H200i case. Is there any overheating problems?

  • 16 months ago
  • 1 point

It's a tight fit but it's not rubbing against anything. My Ryzen is overclocked to 4.0GHz @ 1.2875VCore and I just overclocked my 1070 ti +155MHz core / +200MHz Memory. No overheating at all. This is gaming for a few hours with Diablo 3. I also used 3DMark Time Spy benchmarks to test stability of the video card.

Hope this answers your question

  • 16 months ago
  • 3 points

Ok, I am going to try to do it as well.

  • 16 months ago
  • 1 point

Just a quick question - why the rgb ram if you cannot see it because of the cpu cooler

  • 16 months ago
  • 1 point

I made the mistake of buying the ram first before the rest of the system. If I could return it I would have.

  • 16 months ago
  • 2 points

Ah, otherwise I would’ve just got some vengeance lpx

  • 10 months ago
  • 1 point

you selling that card yet? ;)

  • 10 months ago
  • 1 point

Are you having any cooling problems? I'm running almost the same setup but with a GTX 1080 ti. Here is my build but cant seem to keep the GPU from over heating.

https://pcpartpicker.com/list/2RMy8Y

Thanks

  • 6 months ago
  • 1 point

the 2600x has a better cooler than the 2600 because the 2600x has 30 more watts of power draw

  • 2 months ago
  • 1 point

you still around? looking to get a 2600 or 2600x which one would you prefer

[comment deleted]
[comment deleted by staff]