Description

FAQ: Bought Lian Li vertical GPU mount kit, PCI-E riser is resting on top of the fans literally without the bottom mounting bracket, it is mostly secured by the screws at the I/O port. NO PROBLEMS AT ALL.

RGB at the bottom of the case is not turned on due to it shining directly at my camera.

Overclocked to 4.7ghz. (went down from 4.9ghz just to be safe as it is not delidded) Also used the PC-O11 vertical gpu kit for the GPU. Corsair commander pro installed at back of case to control the 6 RGB fans.

Cinebench R15 cpu score: 1538 (At 4.9 ghz) Time Spy 1.0: 7530 (Graphic score: 7445 / CPU score: 8054) at 4.7ghz

Log in to rate comments or to post a comment.

Comments

  • 24 months ago
  • 5 points

RGB FTW!!!! It will increase your FPSs by 9001%!!!! Either way, very nice!

  • 24 months ago
  • 2 points

RGB is the answer to everything :D #corsair

  • 23 months ago
  • 4 points

I thought you wouldn't be able to mount the GPU vertically AND put fans beneath it. I'm glad to see it's possible because I also have a Strix card and was concerned about how to do it. What mount are you using?

  • 18 months ago
  • 1 point

Bought the lian li vertical GPU add-on set. I did not use the base bracket at the bottom, PCI-E riser is resting on the fans and the GPU is mostly secured by the screws at the I/O port. Sorry for the late reply!

  • 24 months ago
  • 3 points

Nice 4.7ghz overclock! I love those RGB fans as well.

  • 24 months ago
  • 1 point

Thank you. LL120 fans are amazing! but their price are stupidly expensive as well. thank god i managed to get a discount for it

  • 22 months ago
  • 3 points

Im planing on buy this case and the vertical GPU mount and defiantly want to install three fans on bottom. How sturdy is the GPU with only the IO bracket holding it up, and also is the PCIe riser resting on fans? Thanks for any info and sweet build BTW, looks epic.

  • 18 months ago
  • 1 point

Yes the riser is resting on top the fans without the base bracket at the bottom, mostly secured by the screws at the I/O port. A little shaky but mostly fine and no problems at all. Sorry for the late reply!

  • 24 months ago
  • 2 points

where the fudge is the PSU?

  • 24 months ago
  • 2 points
  • 24 months ago
  • 1 point

what temps are you gettting on the gpu?

  • 24 months ago
  • 3 points

On load near the lower 60s to 70, idle 35-40 with the fans below it on quiet mode (400 rpm idle, 800rpm on load)

  • 24 months ago
  • 1 point

Solid look, no complaints. +1

  • 24 months ago
  • 1 point

Thank you :)

  • 24 months ago
  • 1 point

Nice man! Can you post what your temps are? I am planning to overclock and I have a similar build.

  • 24 months ago
  • 1 point

Overclocking at 4.9ghz 82-90 C (1 hour stress test) 4.7ghz stays at stable 80-83. (1 hour stress test) I'm sure you can overclock to 5ghz easily however without delidding i personally am just scared to do it

  • 24 months ago
  • 2 points

That seems really high given the powerful AIO. I've got my non-delidded 8700K @ 5 GHz with an air cooler and it never cracks 80 under prime95 small fft. You may want to check your thermal paste application. Great looking build though.

  • 24 months ago
  • 1 point

Thanks for the heads up

  • 24 months ago
  • 1 point

Woah. 80 is pretty high isn’t it? Idk if I’d be comfortable with my cpu being in the 80s. Then again though, I have a limited knowledge of cpu temps so I could be wrong.

  • 24 months ago
  • 1 point

Yup I think 80s is pretty high too, delidded cpu's at 5ghz get around 70 which is a massive difference. Don't need to worry though it only reaches that high due to the stress test. My limit would be consistently getting higher than 85 as 90 is the danger zone

  • 24 months ago
  • 1 point

Oh I see. Lol want to hear something funny? I just built my first ever desktop pc last Thursday. I start building it, and I get to where I have to apply thermal paste. I scrub the pre applied thermal paste off of the cooler, and go to apply the paste, and I apply wayyyy too much. So Instead of just plopping the cooler down and let it spread naturally, I decided to try and spread it out myself with the tip of the tube... safe to say literally a quarter of the chip wasn't covered at all. Me, thinking it would suffice, plopped the cooler on and left it at that. I go to boot up for my first time ever, and I get an error message saying my cpu is over 89 C. I ignore it, and boot into windows. I download all my various apps and programs (while runningn 89 C at idle) and then I download CAM. I open CAM up, and my CPU temps shoot to 101 degrees. I **** you not. I immediately turned off the system and fixed it, but safe to say I was scared shitless LOL.

  • 24 months ago
  • 1 point

Oh my...

  • 24 months ago
  • 1 point

damn that is a pretty build! what benchmarks are you getting while gaming?

  • 24 months ago
  • 1 point

144 FPS at Ultra settings for Battlefield 1, avg temp 61 C for GPU 65 for CPU

  • 23 months ago
  • 1 point

Nice setup. I got the O11D also, and it's a great case. I have X62 Kraken in mine top mounted also. Just ordered H150i Pro to replace it.

Question, why did you decide to have the side fans as exhaust? purely because of the aesthetics of the fans? Wouldn't the side fans mounted as intake be better for your setup? I have my side fans setup for intake, and my temps are very good. I also have 2 ML120 on bottom for intake. So my setup is sides (intake), bottom (intake) top radiator (exhaust). Just wanted to see what your thoughts are on the configurations and why.

And how do you like the H150i Pro so far with the setup?

  • 23 months ago
  • 2 points

Chose sides as exhaust as i put my LL120 there which is purely for aesthetics, temps were not good at first but it was all the overclocking side fault, once i managed to get the sweet spot for my overclock the temps are really good. CPU: 36-40 celsius idle 40-50 on load, GPU: 35-40 idle 50-60 on load, Prime95 tesst 78-79 constant. I dont think the side affects that much, at most 2-3C at full load probably which i won't see from regular use. Aesthetic wise 10x better with exhaust at side

  • 23 months ago
  • 1 point

Getting the same case soon aswell, planned to go with 3 fans as intake and place my radiator on the side mount with 3 corsair ll120 fans. Just wanted to know why you configured it like that?

  • 18 months ago
  • 1 point

Personal taste, liked the look of the radiator at the top more. Sorry for the late reply!

  • 23 months ago
  • 1 point

Thought the vertical mount that came with the case could only be at the bottom where fans are located at, or am I just wrong?

  • 18 months ago
  • 1 point

GPU/pci-e riser cable is resting on top the fans without the base bracket at the bottom, mostly secured by the screws at the I/O port. A little shaky but mostly fine and no problems. Sorry for the late reply!

  • 8 months ago
  • 1 point

Can you mount the vertical GPU kit any higher? I'm wondering if it can mount high enough to use the bottom PCI-E slot.

  • 24 months ago
  • 0 points

nice build! you say there's 6 RGB fans but I'm only seeing 3, where are the rest at?! this is almost identical to what I'm planning on building next, great job!

  • 24 months ago
  • 1 point

There are 3 at the bottom.

  • 24 months ago
  • 1 point

Yup, good eyes!

  • 24 months ago
  • 1 point

Yup as jaekuN said there are 3 ML120 at the bottom below the GPU, had to turn the RGB off as it will shine directly into the camera

  • 24 months ago
  • -1 points

Very good build. Smart choice to use Intel and NVidia. If you need so many monitors - good for you.

  • 24 months ago
  • 1 point

Thank you :D monitors were accumulated over 5 years haha

  • 24 months ago
  • -1 points

Hey I just wanted to know if you could help me out with a good Setup with a Monitor. (My budget is 1,100)

[comment deleted by staff]
[comment deleted by staff]
  • 24 months ago
  • 1 point

144 FPS at Ultra settings for Battlefield 1, avg temp 61 C for GPU 65 for CPU

[comment deleted by staff]
  • 18 months ago
  • 1 point

No problems connecting anything at all, I used to build custom PCs for a living (probably have built over 500+ systems) this case is very well thought out and easy to build with. Unless you put a radiator at the bottom + fans the USB 3.0 cable may have no space due to its large size otherwise plenty of space for everything else. Otherwise with fans only there is plenty of space, my USB 3.0 cable barely touches the fan but only a little. Sorry for the late reply!