Description

-Recently i delided my 8700k and placed a copper ihs with liquid metal! Temperature drops are amazing! Managed to oc at 5.2ghz with 1.33v and max temps stayed around 68-70c! At stock settings the cpu maxes out at 48-50c with 100% load.

After my initial loops that designed in the Phanteks Enthoo Pro TG i decided to do something more special and extreme with more capabilities for future upgrades!

Being in a long term of searching, I decided to go with the Thermaltake View 71TG RGB. This case has extreme watercooling capabilities and a marvelous amount of room to work with! The only drawback for me is the weight. The case empty weights about 22kg! This has to do a lot with the glass panels which are on every side! With my system fully assembled the case now weights 35-40kg!

Planned my loop configuration without problems and the whole procedure was very smooth! I placed two 360 rads! An EK LC Solutions Coolstream PE 360 and an EK XE 360 60mm Thick rad in the front! Even with this beast I still have had a lot of room to place the two reservoirs and pumps in parallel position!

As for the coolants (and aesthetics of cource!:P) i decided to go with the Mayhems Pastel Blue Berry and Pastel Ice White! Really love the way it turned out inside the system! The color is really perfect and vibrant! I didn't have any issues with pastel fluids until now and also I drain my system very often so not a big deal I suppose!

Comments

  • 12 months ago
  • 5 points

Bravo! In b4 feature... +1

  • 12 months ago
  • 1 point

Thank you!!

  • 12 months ago
  • 3 points

Holy cornflakes batman my feutured sensor is going off.

  • 12 months ago
  • 1 point

Haha thanks a lot!!

  • 12 months ago
  • 2 points

Dat’s pretty good and pretty featured too.

  • 12 months ago
  • 1 point

Thank you very much!! I hope so!

  • 12 months ago
  • 2 points

+1, I love how the rgb fans reflect off of the white coolant

  • 12 months ago
  • 1 point

All I can say is wow.

  • 12 months ago
  • 1 point

Thanks!

  • 12 months ago
  • 1 point

Well looks like its time to get new pants...

  • 12 months ago
  • 1 point

I like it ! Is there and advantage to having a dual loop over one ?

  • 12 months ago
  • 2 points

The biggest advantage is you can set separate fan curves for each loop but has minimal impact on actual cooling and only slightly higher impact on noise. For example you don't have to have every fan blowing harder when only your CPU is under load.

  • 12 months ago
  • 2 points

Thank you! Not a really big advantage! The temps are almost like before with one loop except from the cpu which is now delidded! I did it most for the looks and because i like always to create something better than the initial one

  • 12 months ago
  • 1 point

Very nice build, I love the loops.

  • 12 months ago
  • 1 point

<:0

  • 12 months ago
  • 1 point

DAMN SON

this thing is a monster as it let alone at 5.2 gigs delided and custom looped....

but I mean come on only 16 gigs of ram?

  • 12 months ago
  • 1 point

Hahah thanks bro! No need for more ram until now! Totally useless for me the extra 2 sticks.

  • 12 months ago
  • 1 point

Stunning job!

  • 12 months ago
  • 1 point

Thank you!!

  • 12 months ago
  • 1 point

Awesome.how are the GPU temps?

  • 12 months ago
  • 1 point

Thanks!! About 28c idle and under full load reaches 53-54c max until now!

  • 12 months ago
  • 1 point

I just Saw your reply now..How is it possible that i have lower temps in my GPU than you?? What is your radiator size?

  • 12 months ago
  • 1 point

Χαχα απλα να ξερεις ειδα το build σημερα στο group των gramers Παρα πολυ ομορφο!!!

  • 12 months ago
  • 2 points

Χαχαχα να και ένας Έλληνας επιτέλους! Ευχαριστώ πολύ αγορινα να σαι καλά!

  • 12 months ago
  • 1 point

Χαχα σπανια βρισκω ελληνες εδω XD

  • 12 months ago
  • 1 point

Great build..love the loop design!

  • 12 months ago
  • 1 point

Wow nice chip!!! My chip got rock solid @1.38v @5ghz running prime 95 small near 88c. I wish I had your unicorn chip or your bios

  • 12 months ago
  • 1 point

Ps love the build heaps!

  • 11 months ago
  • 1 point

Awesome build. One question, I'm thinking of doing a dual loop build in this case as well and I would like to know how you mounted the reservoirs to the back wall like that. Keep up the awesome work.